Coastal Cleaning Systems
Coastal Cleaning Systems is proud to provide the best in cleaning services for the Hancock and Washington county Maine areas including Bar Harbor, MDI and Ellsworth. We provide VLM (very low Moisture) Carpet cleaning, hard surface floor care (hard wood, laminate, tile and so on), furniture and mattress cleaning and sanitizing as well as many other services. Many of our processes are Green Clean for your health and the health of our homes and businesses.
We at Coastal Cleaning Systems would be happy to help you with any of your cleaning needs. Contact us at www.coastalcleaningsystems.com or 207 479 4673 for a free estimate and consultation.
This article may also help and was reprinted for your benefit.
Thank you,
Sean Qualls
Coastal Cleaning Systems
Frequently Asked Questions: Care & Maintenance
How are polyurethane or other surface finishes maintained?
Surface finishes like polyurethane require only simple care. Just dustmop, sweep, or vacuum regularly. Always follow the manufacturer's cleaning recommendations if known. When cleaning no longer restores shine, recoat the floor with a surface finish. The frequency of recoating depends on the amount of traffic. Never wax a surface-finished floor, and never use vinyl or tile floor care products on any wood floor.
How are wax or penetrating-stain finishes maintained?
Dustmop or vacuum regularly, and use a buffer to maintain the shine. Always follow the manufacturer's cleaning recommendations if known. If buffing no longer restores shine, you may need to rewax. If so, apply a cleaner and liquid wax specifically for wood floors. Apply the wax evenly, allow the floor to dry, and buff to the desired luster. Depending on traffic, a properly maintained wood floor should need waxing once or twice a year. Be careful not to over-wax a wood floor. If the floor dulls, try buffing instead. Avoid wax buildup under furniture and other low-traffic areas by applying wax half as often as in higher-traffic areas.
How can I clean a discolored or soiled wax finish?
If the wax finish is discolored or has dirt build-up, use a combination liquid cleaner/wax made specifically for wood flooring. Make sure it is solvent rather than water-based. Spread the liquid cleaner/wax with a cloth or fine steel wool and rub gently to remove grime and old wax. Wipe the floor clean, let it dry for about 20 minutes, and then buff.
Can cleaning products for vinyl or tile floors be used on wood floors as well?
No. Never use sheet vinyl or tile floor care products on wood floors. And never use self-polishing acrylic waxes on wood floors. These waxes cause wood to become slippery and dull. In this case, the floor must be sanded and refinished.
Can a wood floor be damp-mopped?
Never damp mop a waxed floor. When cleaning a surface-finished floor, follow the manufacturer's recommendations. You may generally use a dampened (near dry) mop to maintain a wood floor; however excessive moisture will cause damage. Standing water can dull the finish, damage the wood, and leave a discoloring residue. If water spills on a wood floor, immediately wipe it up with a clean cloth.
How can I prevent scratches on wood flooring?
Place mats and throw rugs at doorways to help protect wood floors from grit, dirt and sand. Place felt pads under furniture legs and vacuum/dust your wood floor regularly